Handle up to four different partylines simultaneously. The Q210 P - Speaker Station gives you full control in a cost-effective and easy-to-use package.
Plus, programmable buttons allow muting all mics, make paging announcements or trigger logic outputs. Equipped with a built-in PoE network switch to drive up to 8 wired beltpacks, for a complete, self-contained solution. The Q210 P speaker station is your communication hub.

Q210 P Speaker Station


€ 1,699.00 excl. VAT


Benefits

Good Fit

Unobtrusive, but well fitting into your set-up. The speakerstation is designed to fit into your standard 19" rack. Comfortably done, easy to use.

Expandable

You need an entire intercom system? Manage your communication using the built-in 4-port PoE+ switch. A system that grows with your needs. Quintessential.

Ease Of Use

Setting up the system will take no time. Get the Q210 P - Speaker Station out of its box, connect it to an existing network, plug in your beltpacks. Done. No noise or interference. Just communicate. Quick.

From Pro 2 Pro


Lorem ipsum dolor sit amet, consectetur adipisicing elit.

Specs


GENERAL
Power source 50 … 54 VDC
PSE output power 30W per PSE port
Sampling rate 16 kHz
Headset Connector XLR 4pin male
Connector Ethernet/LAN 4x RJ-45 EtherCon
Gooseneck microphone connector 1/4" jack with 7/16" -20 UNF thread
Built-in speaker 5 Watts
Operating temperature -10 to +50°C
Operation environment humidity 0 to 90% non-condensing
Dimensions (L x W x H) 19" 1HU: 100 x 433 x 44 mm (excl. rack ears and knobs)
Weight 1.7 kg
MICROPHONE INPUT
Bias Voltage 5.8V
Full-scale input range -53 ... +4 dBu
Highpass 10 ... 100 Hz
Distortion @ 1kHz < -75 dB (0.02%) @ + 4dBu FS (min. gain)
< -68 dB (0.04%) @ -30dBu FS
< -49 dB (0.35%) @ -53dBu FS (max. gain)
Dynamic range 92 dB (min. gain)
59 dB (max. gain)
HEADPHONE OUTPUT
Output impedance 27 Ohms
Output level +18.5 dBu (max.)
Frequency response 20Hz to 10kHz (+0/-0.25dB)
Distortion @ 1kHz < -73 dB (0.02%)
Dynamic range (20kHz) 95 dB (A-weighted)
ANALOG INTERFACE OUTPUTS
Output impedance < 2 Ohms
Output level +18 dBu (max.)
Frequency response 20Hz to 10kHz (+0/-0.25dB)
Distortion @ 1kHz < -80 dB (0.01%)
Dynamic range (20kHz) 98 dB (A-weighted)
ANALOG INTERFACE INPUTS
Input impedance > 20 kOhms
Full-scale input range +18 dBu (max.)
Frequency response 20Hz to 10kHz (+0/-0.25dB)
Distortion @ 1kHz < -80 dB (0.01%)
Dynamic range (20kHz) 90 dB (A-weighted)
GPI INPUTS
Input connector D-Sub 9 male
Number of GPI inputs 4
Input type Optocoupler input with current limiter
Input voltage 5V ... 50 VDC
Input current 5 mA (typ.)
GPI OUTPUTS
Output connector D-Sub9 female
Number of GPI outputs 4
Output type PhotoMOS Relay
On resistance < 3 Ohms
On current 200 mA (max.) - resettable PTC fuse 400 mA
Maximum voltage 50 VDC / 35 VAC
(*) all specifications are subject to change without notice